 |
 |
 |
 |
 |
Date: 27 Aug 2001 19:46:16 -0700
From: wfc_001nopsamail.com (w)
Subject: Re: Replacing Front Foglight - 900 ('95)
"Scott Sognefest" <ssognefestnopsam.com> wrote in message news:<dbri7.4622$xb.3628335nopsam1.mntp1.il.home.com>...
> If your 9000 is like my 94 900 the turn signal is a self enclosed assembly
> with numerous switches built into the housing. They wear out. I've had to
> replace my once for wear and once for breakage. The last time I did so, a
> seal in the turn signal assembly failed. The turn signal still worked but
> the brights control was flaky. One key thing to check is the feel of the
> switch lever. If it feels a little loose, replacing it should solve the
> problem. Even if it is not loose, I'd bet on the switch assembly. It costs
> about $75 to get a new one.
>
> "iminj" <wrote in message news:MPG.15ec738f44442ddb989699nopsam.rcn.com...
> > I need some advice re: replacing a blown front foglight on my '95 900.
> >
> > I removed the 2 screws above the lamp housing .... and the lamp flopped
> > inward slightly. NOW WHAT ?? I tried pulling and then pushing the lamp
> > assembly, but I couldn't remove it. I can't get my hands behind the lamp
> > assembly either.
> >
> > By the way, the SAAB manual provides explicit descriptions to replace
> > every other lamp/light. For some reason, the front foglight replacement
> > procedure is not described.
> >
> > Thanks.
> >
> > Howard
And what about the rear foglight. One of mine is out.
|
|
|
|
|