 |
 |
 |
 |
 |
Date: Wed, 5 Sep 2001 14:52:46 +0100
From: "darran.hill" <darran.hillnopsamorld.com>
Subject: Re: Replacing Front Foglight - 900 ('95)
you should see a black square plastic clip which you pull outward to release
the cable, attached to the cable is the bulb. It took me ages because I was
working laying on my back in a confined soace, once you see how the assembly
works it should become obvious.
In the UK we have two front fogs and two rear fogs...a much better set up
than having one.
"iminj" <dajacREMOVETHISnopsamcom> wrote in message
news:MPG.15ec738f44442ddb989699nopsam.rcn.com...
> I need some advice re: replacing a blown front foglight on my '95 900.
>
> I removed the 2 screws above the lamp housing .... and the lamp flopped
> inward slightly. NOW WHAT ?? I tried pulling and then pushing the lamp
> assembly, but I couldn't remove it. I can't get my hands behind the lamp
> assembly either.
>
> By the way, the SAAB manual provides explicit descriptions to replace
> every other lamp/light. For some reason, the front foglight replacement
> procedure is not described.
>
> Thanks.
>
> Howard
|
|
|
|
|