Date: Wed, 19 Sep 2001 00:48:02 +0100 From: "Spinner" <spencer.suttonnopsamorld.com> Subject: Re: 1990 Saab 9000. wheres the wastrod?
Under acceleration.. my boost level only goes half way into the yellow, and that's it.. no more.. I must admit I am a novice and any help would be much apreiacted.. I was told that the wastegate rod on my model should improve things.. the turbo seems very tierd.. when accelerating around the 3000 rev area all is well, however after the littl eboost it goes slugish and less responsive from there. "chrisnew" <chrisnewnopsamorld.com> wrote in message news:kpQp7.4637$qe2.887744nopsam6-win.server.ntlworld.com... > The APC solenoid valve is just above the radiator, with 3 tubes attached, > plus a 3 wire connector - but you won`t find the wastegate actuator rod > there. If you are only at the stage of locating components, I suggest you > visit the Townsend Imports site, before you start adjusting anything. If you > have a problem with boost, there are other things to do first. What is the > problem/are you trying to achieve? > Chris > spinner <spencer.suttonnopsamorld.com> wrote in message > news:cDtp7.28713$Pm5.6809567nopsam2-win.server.ntlworld.com... > > I'm looking to find the Solenoid valve, to adjust the wasterod.. I've got > a > > haynes manual but still no luck.. I really need some advise.. I have the > > 9000 CDS 16v 2.0 turbo.. > > > > thanks ! :-) > > > > > >