Date: Mon, 11 Feb 2002 19:35:16 -0000 From: "JRD" <JonathonnopsameditchAUNTY_SPAM.com> Subject: Re: SIDII and ACC codes
M & K, Yes, the Calibration key combo is AUTO+OFF. My mistake, i typed the post form memory but I did press the right buttons on the ACC unit. JD "mark & kate" <marknopsam5597.freeserve.co.uk> wrote in message news:a492up$fs1$1nopsamg4.svr.pol.co.uk... > u say you pressed econ and auto together, on my 9-3 convert is auto and off > together , may be u are pressing the wrong two ! > let me know m8 > Mark > marknopsam.fsnet.co.uk > "JRD" <JonathonnopsameditchAUNTY_SPAM.com> wrote in message > news:1013448799.244.0.nnrp-08.9e981281nopsam.demon.co.uk... > > Hi, > > Today my ACC unit behaved very strangely. When on AUTO (outside temp today > > was 11 deg C and both sides were set to 20 Deg C) the air comes out full > > blast and then goes to the windscreen then the foward facing vents then my > > feet as the temp changed. I had noticed the although both sides were set > to > > the same temp the air on the drivers side was colder than the passenger. > > I did a recalibration (AUTO+ECON) initially i had a Zero on the left of > the > > ACC display then after 30 secs or so there was a 1 on the left then 08 on > > the right. > > > > Can anyone shen any light on the codes and whether the ACC unit needs to > be > > looked at by my local dealer. > > > > TIA > > JD > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > 2000 9-5 Est 2.0 LPT > > > > > >