Date: Mon, 6 May 2002 09:28:22 -0400 From: "KeithG" <noonenopsamhlink.net> Subject: Re: repost ... 9000 CSE power seat problem
Thanks, Danny! KeithG "danny" <dannynopsamia-esprezzo.com> wrote in message news:3CD5A40F.BF4342AFnopsamia-esprezzo.com... > Ted Harris wrote: > > > I just noticed something wacky about the controls for the passenger seat in my > > 9000 CSE .... the control only works when the passenger door is open! Is that > > standard? Is it something that has been programmed that way? Is it a wiring > > problem? Is definitely strange. > > Keith answered your original question, answer reposted here in case your server > didn't pick it up: > > Saab designed the CS models with power seats to operate 1) key in ignition - > turned to 'on' or 2) door open. The 2 modes are selected by the door switch. > If one mode does not work, the switch is probably dirty. Remove the screw > and gently pull the switch out of the door jamb. See if you can clean the > contacts. I was able to affect change by twisting and cycling. If that > fails, replace the switch. Good luck. > > -- > Regards, > Danny > > http://www.gaggia-espresso.com (a purely hobby site) > http://www.dannyscoffee.com (UK advert for my mobile espresso service) > swap Z for above characters in email address to reply > > >