Date: Wed, 8 May 2002 17:28:47 -0700
From: "Abdallah Jamal" <abdallahnopsamAMnopsamrgate.ca>
Subject: headlights


when i turn the head light switch on, the "low" beam headlights remain = off, but the "high" beam activates using the headlight dipper switch. = before this happened, the low beam lights were half the intensity they = should be, then they cut out. i had checked the headlight relay a while back, cleaned it (one = connection was badly oxidized and the plastic around it had melted back = somewhat) and re-installed it and the lights worked fine for about 3 = weeks. i have also rebuilt the the "little plastic square" in the = dipper switch and it works like a charm. any thoughts? could the relay connection oxidized again, so soon? abdallah 87 9000s

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]