Date: Mon, 01 Jul 2002 08:06:47 -0400 From: KeithG <noonenopsamspring.com> Subject: Re: 1992 900S CV Front CV Boot tear...
Replace the boot. It will require removing the front knuckle from the car and disassembling the driveshaft from the outer CV. At this time, make sure you look at the inner and I would replace it as well. If the other side is cracking with deep cracks, might as well replace it before it rips. KeithG notooyou wrote: > I have a new small tear in my front CV Boot that has started spewing out > Grease. How hard is it to replace the boot, and how is the best way to go > about it? I have not noticed any problems with the steering or anything, > just went to check brack pads and noticed the new tear. Any advice would be > appreciated. Thanks Kyle > >