Date: Sun, 1 Sep 2002 18:30:01 -0400 From: "g c" <nbtrownopsamet.on.ca> Subject: '92 900 CV - Brake/turn signal/tail lights wiring
Help! I'm trying to connect a trailer wiring set-up to my 1992 900 convertible, but can't find anything to decipher the wiring connections. There is a harness coming to the left rear light block, with similar connections going from it to the right block. I couldn't detect a wire carrying pulsing 12v power to the turn signal when it flashed. Does anyone have the colour codes for this particular year/model, so that I can find the lines that power the left and right turn signals, the stop lights, and the tail lights? Then I can connect them to a converter (4 wires in, 3 wires out, plus grounds) that will hook up to a north American trailer wiring set to give the combined stop/turn signals plus tail lights, that the trailers use. Trying to set this up tonight, so your help much appreciated! Also, where is the flasher located, and how is it got at - (thinking of changing the mechanical one to an electronic one, and may have to replace it anyway) Thanks!