Date: 17 Sep 2002 09:11:57 -0700 From: osterndnopsam.com (Dale O) Subject: Re: Cruise control
I finally figured out that the speed sensor to the cruise control is not operating correctly. It goes from 0 - 5.88V and stops there (maybe 40mph). At speeds beyond that it stays at 5.88V. Can anybody tell me where it's located and if it's behind the dash (please tell me it's not!!!), how to replace it? Thanks! osterndnopsam.com (Dale O) wrote in message news:<758a984c.0209070640.3afc02e0nopsaming.google.com>... > Thanks for the sight. A lot of great info there. I pulled the > control mod and checked for poor solder joints, cracks, or fried > components but all looks good. I'm going to tackle it now using his > advice and see what I find. > > > KeithG <noonenopsamspring.com> wrote in message news:<3D78FE5B.6060806nopsamspring.com>... > > see www.townsendimports.com -> technical docs, electrical, cruise. > > > > KeithG > > > > Dale O wrote: > > > Hope someone can help me out with a cruise control problem on my '87 > > > 9000T. Cruise will not work at all. Fuse OK. Tested switch on stalk > > > and looks OK also. Vacuum pump not working (it is operational though) > > > and signals do not seem to be getting to it (no 12V or control). I do > > > not have a wiring diagram, so I'm troubleshooting blind. Does this > > > sound like a bad module? Any way of testing? > > > > > > Thanks! > > > > > > Dale Osterndorf > > > osterndnopsam.com