Date: 13 Oct 2002 20:38:51 -0700 From: ychennopsam30.net (Yaofeng) Subject: Re: 9000 brake light problem
Check the light socket. The socket may have come loose from the seat. It is rather flimsy if you ask me how they put the rear light assembly together. I had to use epoxy to glue the socket back to its plastic seat. Yaofeng "The Grand Poobah" <eyles_jnopsamgovt.nz> wrote in message news:<01c272f7$cb454bc0$08350a0anopsam8004.wcc.govt.nz>... > Hi Saabers, > > The pictogram shows a failure in the rear lights (has been showing > intermittently in the past after damp weather but always came right). > > The left rear brake light now does not work at all when the brakes are > applied, BUT the bulb itself is OK and lights when the headlights are > switched to the intermediate position. > > This looks like something simple that even I could fix if I knew what to > do. Any advice appreciated. > > Also, not sure if this is related but my seat belt warning light has never > worked. Again the bulb is OK as I checked it yesterday. It looks like the > previous owner had a radar detector mounted on the dash (wires and > connector showing beside drivers door) if this is relevant. > > cheers! > > BTW my dodgy remote button was fixed by an electronics geek at work, cost > me a dozen Steinlagers (20 bucks) instead of the $108 NZ the dealer wanted > for a new one.
 |
 |
 |
 |
 |
