Date: Mon, 24 Mar 2003 12:59:02 -0000 From: MeatballTurbo <carl.robsonnopsamcing-czechs.com> Subject: Re: Silicon vac hose question
In article <BAA0FE91.4DC5%pjghnopsamyonder.co.uk>, pjghnopsamyonder.co.uk says... > I finally found the gauge I like - it's the SW brand -30 PSI Vac to 15 PSI > Boost white face with a black pod. Much better than my > combo-compression/fuel pressure tester trailing in through the window :) Now > where's best to permanently T-piece it into? > Don't know about the boost gauge, but when I added the new dump valve, the old ones vacuum and T piece had been removed too. I first teed into one of the ones going into the cruise control, later I moved it to the one going into the FPR, didn't make any difference, but it made for marginally shorter run to the joint. Probably wouldn't have made any difference, but something just put me off using the one that went to the dizzy vac advance. -- Carl Robson The poster formally known as Skodapilot. http://www.bouncing-czechs.com
 |
 |
 |
 |
 |
