Date: Tue, 15 Apr 2003 08:56:34 +0100 From: Grunff <grunffnopsam.com> Subject: Re: turbo question
wysiwyg.docnopsamspring.com wrote: > thanks to all who responded. > the problem is still the same, no power. > the boost pressure gauge responds but > the boost pressure only goes slightly into the center section. > i did check the waste gate linkage > as well as the hoses going into everything all around. > the ecu module has power and clicks when plugged and unplugged. > it almost acts like the distributor is not advancing. > is it possible that the turbo has stopped turning > if so how can i check this. > any additional input would be appreciated. Not, it isn't possible that the turbo has stopped spinning. If it had, the boost needle would never move beyond the white/yellow border. Did you suddenly, one day, go from having full boost to having half boost, or did it happen gradually? -- Grunff
 |
 |
 |
 |
 |
