I have a 1996 900 SE, and even replacing the bulb is a pain in the neck. When mine burned out, I ended up taking the car to the dealer, and having them do it. I don't understand the comment below about a sealed unit, and I think I paid about $45 to have the dealer replace the bulb. It took about half an hour, and I don't understand how replacing the whole unit would take two hours. Perhaps the dealers have some special tools. andrewunix wrote: > > Mon, 14 Apr 2003 15:32:48 GMT, mkarinnopsamhlink.net suggested: > : I have a 97 900SE with a broken fog light on the left side. > : > : Any suggestions on how to remove and replace it? > > It's a bigger job than it would seem. Basically, you have to unbolt and > remove the entire splash guard from the underside, and then you can get to > the bolts that hold the fog lamp in place. The wiring connectors can be a > little bit difficult to get off on a car this age. The fog lamp is removed > by lowering through the bottom. All-in-all it's about a 2-hour job if > you've never done it before. > > Unfortunately, it's a sealed unit so you can't just replace the lens. You > should be able to find one for around $100 new, though. > > -- > agreenbu Return to Main Index
 |
 |
 |
 |
 |
