The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Sun, 20 Apr 2003 14:39:57 +0300
From: "Japso Punnonen" <baltika7nopsam.com>
Subject: Re: 9000T16 stage1 problems


"Japso Punnonen" <baltika7nopsam.com> kirjoitti viestiss”:b7ts7v$d4q$1nopsam1.songnet.fi... > Hi, Saab-gurus! > I have 9KT16, -87, with APC and mechanical distributor. I installed stage1 > (Speedparts, Sweden), but the boost rises only to 1.0bar at max. Should be > 1.2bar. > Yesterday it climbed only to 0.8 bar. > I tried to test knocking-solenoid, but even how hard I knocked the block, > nothing happened.(ignition were switched on, I also tried it when engine > were running.) > Allthought car runs well, but the lack of power is obvious. > Then I found the instruction to assembly a knocking light (led) to > APC-control unit, but those instruction were to 900-model..didnt worked on > my 9000. Have anyone installed the light to 9K? In 900 ledĄs negative wire > goes to pin number 19, (in APC-box). Which number it is in 9K-model? > I use 98 octane gasoline, even tried booster (octane were over 100), but > there wasnĄt any difference. > How can I test magnetic-valve? > > Thanks for the answers > > P.S. I measured the basic boost, were 0.2bar, should be 0.4-0.45bar? Could that infect to max boost? Down pipe leaks a little, about a meter from manifold.Now I have a reason to buy a 3" downpipe (to tell my wife:)).

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]