Date: Mon, 05 May 2003 15:59:35 GMT
From: "Walp" <>
Subject: Re: Check Engine light and Platinum Plugs...

Had the same problem on a 1996 9000CS 2.3L. I was told by a archive that the resistance across the plug is very different than the NGK plugs, the direct ignition module sensed this and shot out the error. I put NGK's back in and all is fine. Walt "Chris M." <> wrote in message > Hey Everybody, > I recently swapped out my plugs for the Bosch Platinum's...I triple > checked the gap (1mm) and made sure proper installation was > performed...Ever since I put the plugs in the Check Engine light comes > on whenever I put my foot down on the gas and goes away if I let off > for a few seconds...Anybody else have this problem? > > Thanks ahead, > Chris >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2021 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]