Date: Thu, 05 Jun 2003 15:40:30 GMT From: "Fred W." <markcharlesnopsamv.net> wrote in message news:5637-3EDEFBFA-152nopsamefull-2177.public.lawson.webtv.net... > I just bought this car used so I'm not too familiar with how things > should work in it. I keep my temp gauge in the Fahrenheit mode & the > lowest temp that I get is 62 degrees before it goes into 'LO' & then > defaults into the high '3' setting for the fan. Shouldn't I be able to > set it at a temp lower than 62 degrees? Nope, that's how they work. 62F is pretty darn chilly (16.6C). > Also when I first start the car > it always defaults to the maximum '3' fan setting. The AC does not work > but I'm in the process of diagnosing it. Thanks for any advice. > Mark You can program the ACC for what mode to strat in. Just get it the way you like and then press and hold the top and bottom buttons in the right hand column for 3-4 seconds. After this the unit will default to that mode when the car is powered on. I prefer turning everything OFF and then setting that as default. It's a simple matter to hit the "auto" button if I need HVAC. -Fred