Date: Sun, 15 Jun 2003 17:35:58 GMT From: "radar" <radar100nopsamyonder.co.uk> Subject: Re: Emergency Flasher Switch - '95 9000CDE
You will need to remove the top of the dash to access the back of the instrument cluster :- first remove the speaker covers (t10 screws)and the 'screen pillar trims ( pull carefully ) then remove 2 m8 bolts holding a safety cable to the pillars (12mm spanner) , next remove 2 8mm headed screws and 2 t25 screws that are under the speaker covers , one t25 screw behind a rubber plug at the top edge of the glove box (above the fusebox cover) and finally a t25 screw that is up behind the edge of the dash top in the instrument recess the lift the edge of the dash top up and pull into the car away from the windscreen Hope this helps Radar 93 9000 cse "Earl Beachler" <ebeachlrnopsamail.com> wrote in message news:qkllevo57rgmavo98srh34ous27v969be6nopsamcom... > My emergency flasher switch just popped back into the dash leaving > only the front ferrule sitting in my passenger seat. I cannot retrieve > it with any tool that I have. Does anyone know how to access the > innards of the dash (instrument cluster) so I can get the back part > out. Also, from the looks of the ferrule, I am going to need a source > for a new switch. > > ebeachlrnopsamail.com