Date: Sun, 15 Jun 2003 10:13:30 -0400
From: KeithG <>
Subject: Re: Two dismantling questions

the same kind of check valve that is in the PCV line works just fine. KeithG MeatballTurbo wrote: > In article <>, > spouted forth into > >>It sounds like you may have the check valve on the vacuum reservoir >>ruptured. This is the white plastic thing in the RHS fender. Try >>disconnecting the unit and plugging the hose. Your ventilation controls >>will not work, but the hissing should go away. If so, just get an inline >>checkvalve for this hose. >> > > The Valve in that is well gone already. I've been driving since march > while trying to locate a good used vac cannister, without vent controls. > No breakers round here seem to have 900's in. Seen plenty of 9k's, even > a 90, but no 900's. > > Any idea what I would look for, for an inline checkvalve? Sounds > intreguing, might be easier to find than a new cannister.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]