Site News -
11/25: Special Ad Rate |
11/1: Members: Log In to See Fewer Ads!
Date: Mon, 23 Jun 2003 08:38:48 GMT
From: "Mark Plumlee" <turbospgnopsamsouth.net>
Subject: Re: SID
there is an upadated part-
if you are under factory warr. then get a new one!
"Bill Jackson" <wjacksonnopsamesterdotrr.com> wrote in message
news:oKKIa.84614$zm1.9984nopsamter.nyroc.rr.com...
> It's likely that the cause of the problem is a breakdown in the conductive
> foam or glue that is used to hold the flex to the PCB. Applying pressure
> will make the problem go away for a while but (1) the foam that is used
to
> apply pressure will eventually compress under vibration and pressure and
(2)
> the contacts are still not optimal and will likely get worse.
>
> the question is how long that will take. If it takes 1 year, then it's
> probably bad. If it takes 30 years, who cares.
>
> I'm going to try the foam solution for my SID, but I was thinking of
> investigating a more permanent solution
>
> "andrewunix" <agreenbunopsamnet> wrote in message
> news:slrnbf62rq.5fa.agreenbunopsam.nyx.net...
> > Fri, 20 Jun 2003 01:52:48 GMT, wjacksonnopsamesterdotrr.com suggested:
> > : yea, but that is but a temporary fix. It'll eventually fail again.
> >
> > Why will it fail again?
> >
> > --
> > agreenbu Return to Main Index
StateOfNine.com
 |
SaabClub.com
 |
Jak Stoll Performance
 |
M Car Covers
 |
Ad Available
 |
