Date: Sun, 20 Jul 2003 16:48:07 +0100
From: Grunff <grunffnopsam.com>
Subject: Re: I'm in deep pooh


MeatballTurbo wrote: > When I had the disc off, I noticed a CV boot starting to go (outer one), > I whacked a cable tie to hold it for now, but guess what next job is. Do both inner and outer at the same time, by withdrawing hub and half shaft at once. Dead easy. > Oh, and I did proper handbrake set procedures till it holds on 5, locks > on 6, and won't go higher than 7, but the passenger side doesn't seem to > be holding so well, so I may have to tweak the cable. I've definitely come across this - small differences between the calipers can easily cause a difference in handbrake efficiency between the two sides. Leave it 'til both calipers have worn in, and the pads are bedded in, then go through the handbrake setting procedure again. -- Grunff

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]