Date: Sun, 20 Jul 2003 14:42:42 GMT
From: 'nuther Bob  <nooneherenopsamaddress.com>
Subject: Re: 98 900SE Turbo - Cant open the Hood (bonnet)


On Sat, 19 Jul 2003 12:40:39 -0400, "LeePC" <leepc58nopsamail.com> wrote: >Thanx Bob >I took at it this A.M. >Pulling on the cable is useless. >I need to get some jack stands. >Every other vehicle I've owned in the past 20 years was a truck or SUV. >Ground clearance was never a problem. >I cant even climb under neath this car. >Hahaha ..... New Toys .... New Tools. If you don't have a floor jack, you might want to check out a deal that Sears has with a 3 ton floor jack and a set of jack stands thrown in for "free". Not too expensive and well worth the time savings if you have a storage location. There's a "nub" under the front of your car where you can put a floor jack and take up the whole front end at once. Put the stands under the fixed frame, lower onto stands, and you're all set. Of course, I'm sure I don't have to tell you to NEVER work on a car on a jack, only on properly located jack stands. You don't want to hear the stories of guys that made a mistake on that point. Bob

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]