Date: Thu, 17 Jul 2003 18:40:01 GMT From: hohnopsamlid.invalid (Goran Larsson) Subject: Re: 9-3 manual gearbox oil
In article <p5mdhv85if2jh6r1troo2c6pu6sc0s8lb5nopsamcom>, Colin Stamp <colinnopsamp.plus.com> wrote: > My problem is that the Saab oil carries dire warnings along the lines > of "MUST NOT BE MIXED WITH OTHER OILS" I've just bought another two > litres of the Saab oil and I'll change it again, but will that be > enough to reduce the percentage of old oil to an acceptable level? The MTF 0063 gearbox oil should *absolutely* not be mixed with other oils, synthetic or dino. No exceptions. The procedure used to switch from any other oil to MTF 0063 involves: * Drain the old oil. * Add 1.5L of new MTF 0063 oil. * Run engine with first gear (wheels in air) for a couple of minutes, or drive a short trip. * Drain the oil. * Add 1.5L of new MTF 0063 oil. * Run engine with first gear (wheels in air) for a couple of minutes, or drive a short trip. * Drain the oil. * Add new MTF 0063 oil until oil flows out of oil level hole. -- G–ran Larsson http://www.nospam.com/saab/
 |
 |
 |
 |
 |
