Date: Wed, 23 Jul 2003 13:29:50 +0100 From: "Andy Hookins" <andrew.hookinsnopsamamnopsamodata.co.uk> Subject: Re: 9000 CSE Indicator/cruise/Hi beam lever, pricy?
"Nel Frikandel" <nelfrikandelnopsamail.com> wrote in message news:kj8rhv44fj5t41i6r00qrucbnhhptbttesnopsamcom... > Shit. Had the switch replaced by the junker's one. > Problem stayed. Turned out to be the relais causing it. Remove the relay, take off the plastic cover and check the solder joints on the PCB. You may find some bad solder joints especially around the terminal pins. Just re-flow the solder with a soldering iron and some flux. Much cheaper than buying a replacement relay. Hope this helps and good luck, AndyH '94 9000 CDE > > Bad day. .Problem not fixed, cuz relais not on stock! > > On Wed, 16 Jul 2003 22:47:55 +0200, Nel Frikandel > <nelfrikandelnopsamail.com> wrote: > > >Hi, > > > >Mi right turning signal keeps failing from time to time, annoying and > >possibly hazardous. I've had some occasional claxon concertos, turning > >right unsignalled. > > > >The strange part is, it doens't always fail , the first 3 to 5 times > >from cold start, it's okay, after that it's more or less over, an > >occasional lucky shot excepted. So bolbs and relais should be okay, > >the problem could be in the switch itself. > > > >Today I went over to the shop, they said they needed to replace the > >whole thing. According to the guy the part costs 180 EURO new, luckily > >they had a junker in the back yard, also fitted with Cruise, and I > >could have that part for half the new price, so 90 EURO. > > >
 |
 |
 |
 |
 |
