Date: Mon, 1 Sep 2003 16:21:11 +0100
From: MeatballTurbo <>
Subject: Re: Body parts compatible with '83 900s ?

In article <bivm0u$dl94n$>, says... > Yes, good point - at some point, not sure exactly when, the > driver seat mounting changed. Earlier cars had a horrendous > setup using L shaped 'pins' at the back of the seat (my 86 has > that setup), but on later ones the seat is just bolted in place. > yeah. My '85/85 rattly quick release driver seat. Passenger seat bolts in front and back as most cars do. I think the slot in pins was something to do with height/angle adjust on the drivers seat on the early ones. Rather than use a normal mechanical adjust they went with the flip over tab that had to allow the seat to slide in it's mounting. I guess some wear and tear of the hinge at the front, and theslip in hoops on the floor has left some rattle now. -- The poster formerly known as Skodapilot.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]