Click Banner for Details on this Classified

Date: Mon, 01 Sep 2003 16:33:26 +0100
From: Grunff <>
Subject: Re: Body parts compatible with '83 900s ?

MeatballTurbo wrote: > I think the slot in pins was something to do with height/angle adjust on > the drivers seat on the early ones. Rather than use a normal mechanical > adjust they went with the flip over tab that had to allow the seat to > slide in it's mounting. > > I guess some wear and tear of the hinge at the front, and theslip in > hoops on the floor has left some rattle now. Just been out to compare, and I think (may be wrong, but looks that way) that the later bolt-down seat will bolt onto the hoops of the earlier pin setup. The car I have with the later (bolted down) setup is bolted onto very similar hoops as the pins fit into. -- Grunff

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]