Date: Sun, 21 Sep 2003 18:58:18 GMT
From: gregory trimper <trimpernopsamcop.net>
Subject: Re: 90 Saab will not start


Shawn wrote: > I found the AMM and checked the little wire and it appears > to be OK. I sprayed it down with some cleaning fluid as well. This is a really bad idea: you want no fluids/solvents/cleaners/etc on that wire. The proper procedure is to free the AMM/MAF housing, turn on the ignition, and check to see if the wire glows. If it doesn't, then you need to check both voltage to and resistance across the connectors. A Bentley or other manual will help you in this test. > I pulled each spark plug to add the starting fluid. Also, not the best of ideas: by "starting fluid" do you mean ether? or some other fluid? lycka till! GTr

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]