Date: Tue, 14 Oct 2003 03:36:34 -0400
From: Malcolm <mwm1XXXnopsamedu>
Subject: Re: re My shifter

On Mon, 13 Oct 2003 08:54:38 +0000 (UTC), "Saabtech" <> wrote: >The knob on a post N1004566 9000 is a fit and non remove knob, Once its on, >its on. It is now sold as an assembly and can be fitted as follows: Lift up >gaiter, remove semi circular spring, rotate white plastic collar in opposite >direction to that of spring tension and lift out. Remove circlips and fit >new bits as required. If you want a rubber gaiter, get the assy with the >rubber gaiter, Trying to seperate the assy will only end in snot and tears. >For some reason the North American stick is a different spec to the rest of >the world, so the above statement may be complete bollocks. Regards Tom. > Thanks vey much , Tom. will inform as to results. Thanks again. Malcolm

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]