Date: Mon, 13 Oct 2003 15:26:14 +0100
From: MeatballTurbo <>
Subject: Re: Wheel stuck on

In article <>, says... > My original intention was to change drive belt, still haven't managed. > To gain access, I wanted to remove the plastic shield inside the wing > on the car's right side. However, one of the screws just rotated > infinitely and didn't come out. I suspect that a garage mechanic who > previously did something in that area have over tightened the screw > using a power tool, and the hidden backside nut has come unstuck. Doh. > if you can grip with a set of pump pliers, you may be able to pull the hidden nut tight enough back against the wing to unscrew the screw. might only get 1 1/4 turn at a time, but better than drilling out. -- The poster formerly known as Skodapilot.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]