Date: Sat, 25 Oct 2003 19:32:07 GMT From: hohnopsamlid.invalid (Goran Larsson) Subject: Re: High Beam problem saab 95
In article <RKymb.2226$X22.1044nopsamread2.news.atl.earthlink.net>, TGS <tgsnopsamcess.net> wrote: > I am having a problem with high beam on drivers side... thought it was > burned out so I replaced it. That was not the problem... fuses all look > good... swapped relay with the equivalent... that didn't work... what is the > lamp control and could this be the problem? The lamp control is the module that supervises the lamps so a warning can be displayed if a lamp goes out. However, the Saab 95 did not have a lamp control module. If you have an early Saab 9-5 then you can look at the schematics on my webpage < http://www.nospam.com/saab/information_headlights.shtml >. If only one high beam is out, then the problem must be in the lamp control module, the fuses, the lamp socket, ground, and the wires connecting these parts. -- G–ran Larsson http://www.nospam.com/