Date: Sat, 01 Nov 2003 19:32:08 +0000 From: Grunff <grunffnopsam.com> Subject: Re: Changing the coolant header tank. Help!!!!
MeatballTurbo wrote: > OK, while changing the brake servo today, I maged to snap the small > coolant pipe from the header tank, while trying to manouvre it out of > the way of the master cylinder. D'oh! > I know where there is one in the scrappy, and the coolant in the system > still looks OK. WHat would be the best way to swap the header without > having to do a complete drain flush and refill? Just undo the hoses goig to the header tank. That will bring the level down below the tank. With the tank being the highest point, you'll only lose about 2-3 litres. > And I still have to find a pressure bleeder now too, so I can bleed > everything through as I had to disconnect the master cylinder to get the > old servo off. Make one. B&Q 5l garden sprayer, about £12. Hose. Barb. Cap from scrappy. -- Grunff