Date: Sat, 1 Nov 2003 19:45:15 -0000 From: MeatballTurbo <carl.robsonnopsamcing-czechs.com> Subject: Re: Changing the coolant header tank. Help!!!!
In article <1067715226.94457.0nopsam.uk.clara.net>, grunffnopsam.com spouted forth into alt.autos.saab... > > Make one. B&Q 5l garden sprayer, about £12. Hose. Barb. Cap from > scrappy. > > I'll grab one from Halfords if they have one, because they are only about £12 anyway, and use the spare for pressure, and I have a footpump so I can get the spare back if it starts to go too soft. Cost me £30 for the Servo, so I hope it has done the job. Managed to get the brakes back together OK below the dash. I just have to put the dash back together when I'm finished. ATM it doesn't even have a steering wheel on. I gave the cruise control switches under the footwell/knee bolster an adjust and tweek in a bit while I was down there as they are the screw adjust type, and cleaned the connectors. And I reckon I'll have a look at some of the vac hose, but the brakes and coolant get priority. Whats the best way to bleed the coolant? -- Carl Robson (The poster formerly known as Skodapilot) http://www.bouncing-czechs.com