Date: Wed, 29 Oct 2003 17:17:12 GMT From: "David Spear" <dspearREMOVE99canopsamo.com> Subject: Re: Replace lamp in lit switch for heated seat. Help please.
pry it out with a screwdriver, basically you are only using enough force to dislodge 4 or 5 spade connector male ends on the back of the switch. <Ray> wrote in message news:0omvpvstqebkggv859ct3nla6cr19f3g34nopsamcom... > Thanks Brian > > I know it may be obvious but how do you get the switch to "pop out" of > the dash. Do you prise it out or is there a way of pushing it out > from behind? > > > On Wed, 29 Oct 2003 00:46:55 -0500, "Brian Lever" > <brianlevernopsamatico.ca> wrote: > > >The switches pop out of the dash. Once you have the switch removed, bulb > >replacement is obvious. > >If you disconnect the switch, be careful that the harness does not fall into > >the dash. > > > ><Ray> wrote in message news:8crspv0b0v8rast1o5heq68i2amtur06l7nopsamcom... > >> Is it possible to replace a lamp that has failed in the switch for the > >> driver's heated seat in a 9-5 Griffin without removing the dash? > >> > >> Ray > > >