Date: Sun, 9 Nov 2003 20:32:11 -0000 From: "Mike P" <stickitnopsamranus.com> Subject: Re: 1987 16V Turbo idling problem
"Grunff" <grunffnopsam.com> wrote in message news:1068409588.40972.0nopsama.uk.clara.net... > Mike P wrote: > > > Yes, top of TB, about 5cm in front of the cold start valve .If you have the > > Haynes maroon coloured manual for > > the 90,99 and 900 1979-87 manual, the bolt is on page 79, diagram16.18, but > > the manual doesn't say what it is. > > Throttle valve air bleed screw. It allows you to adjust the > amount of air which bypasses the throttle plate. Discontinued on > later models. You can use it to set the idle in exactly the same > way as the throttle stop screw. > So as long as it's idlingOK, it doesn't matter what either the air bleed screw or throttle stop are set to? Thanks a lot for your help Mike
 |
 |
 |
 |
 |
