Date: Wed, 26 Nov 2003 09:24:57 +0000 (UTC)
From: "Saabtech" <>
Subject: Re: radio security code entry

"Andy" <> wrote in message > re: saab 900se 1997 > > after changing the battery, a simple enough task to re-enter the security > code for the radio, which came with the car....or not as the case maybe. > > Once prompted by the 'Code In' message, I enter the 4 digit code.... fine. > But the nothing happens, the code is still there on the screen, but the > radio doesn't seem to want to do anything with it! I also don't appear to > be able to 'hold down the BAND button for 5 seconds, to clear the screen and > be given the chance to enter it again. Even if I did I am not sure what > else I would do different to that above. > > Any ideas? > > thanks in advance. > A Its probably the wrong code, Pressing band for more than 5 seconds will clear the incorrect code, If you get it wrong three times in succsession you have to leave the set switched on for an hour before you get one more try and so on. If you do not have the right code e-mail your chassis no, reg no, and if poss the numbers off the set itself, just in case it has been changed. Regards Tom. > >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]