Date: Tue, 27 Jan 2004 02:32:15 -0800 From: "_Al_" <al010101nopsamcom> Subject: Re: Carb/Fuel Injector Cleaner?
you can use some stuff called `sea foam` from Napa, or....depending upon how brave you are...you can do water injection. water injection, you just simply let the engine suck about 2 cups of water through a vaccum line, don't let it stall, feed it slowly, keep rpm's up..... once it's all through let it idle for a few seconds then shut it off, let it sit for about 45 minutes, then fire it up....then just to be safe you might want to do a oil change (250k....might have a little blowby at the rings) "Mick Forstag" <forstagnopsamfier.com> wrote in message news:101bm396821njdcnopsam.supernews.com... > Hello All - > > As the doting owner of an '88 9000 Turbo that's going on 250K, I'm wondering > whether, aside from other routine preventative maintenance, there's any > benefit to using any of the variety of carbeurator/fuel injector cleaning > fuel additives that are available. And if so, are any brands more > recommendable than others? > > Appreciate the wisdom of others' opinions on this stuff, be it snake oil or > not! > > >