Date: Sat, 28 Feb 2004 00:01:00 +0000
From: Grunff <>
Subject: Re: Preventing/repairing dash cracks

James Sweet wrote: > Those screws are a real pain, the idea is that there's plastic tubes that > they route up through, but on the car I worked on those were broken. What I > ended up doing was removing the radio and bracket, and the headlight switch > and I found I could reach around with my finger to guide the screws through > the upper loop and into the threaded hole in the bottom of the dash. It > takes some dexterity but it can be done. Also some of the screws are > different lengths, gotta put the right one in the right hole. They're *all* different lengths. Theyr'e markes with grooves at the end (1,2,3 or 4) to indicate the correct order. -- Grunff

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]