Date: Sat, 19 Jun 2004 13:53:26 GMT
From: Steven Stern <sdsternNOSPAMHEREnospamAMHEREmindspring.com>
Subject: Re: Replacing headlight lamp in 2000 9-5


On Fri, 18 Jun 2004 15:53:22 GMT (more or less), "bj" <damagednospamged.com> wrote: >Idiot question...how do you replace a burnt out headlight lamp in this car? > Look at the back of the headlight assemblies. On each, there are two round plastic covers, like the tops of jars. Unscrew (about 1/2 turn) the one behind the burnt out bulb. Pull the wiring clip off the bulb. It's just a friction fit, so pull it straight back. The bulb itself is held in by a metal clip. Look closely and you'll see it fits into a notch on the bulb holder. Press in on the clip and push it to the side. The bulb is now loose. Reverse the process to install the new bulb. Be careful not to toch the quartz part with your fingers or you'll shorten the life of the bulb.

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]