Date: Tue, 31 Aug 2004 21:16:12 GMT From: "Rob" <robjnospamAMwirenet.nl> Subject: Re: Cruise on 9000CSE
"KeithG" <noonenospamay.com> schreef in bericht news:0qGdneJ2DORdF6_cRVn-qQnospamopenwest.com... > As I said, interesting. Sorry for the mis-direction. I am looking a US > EPC. The 1995> part number looks like the stepper motor I am referring > to. It must also have the electronics in it as well so that it is mostly > a stand alone system. This EPC does not show a vacuum pump on the 95>. I > just assumed that it was connected to the Trionic. > > If yours is the earlier style <94 and it is intermittent and the ECU is > a Hella ECU (mounted separate from the actuator), all I can suggest > short of oscilloscopes and frequency generators is to try a replacement > used unit and see if it is better... The defective units on the C900s > (92-93) are Hella as well. They seemed to have poor solder or cold > soldered joints. I was able to resurrect 2 of them by removing the red > muck from the board and removing the solder and resoldering all the > components. Tedious work. > > KeithG > Thanks guys, i resoldered every single component, and it seems to work again. Temperature outside now about 15 degrees Celcius, and the CC works fine again. Problem solved????? I hope so!!!! Rob