Date: Fri, 27 Aug 2004 12:34:24 -0400
From: cs <cbsnospam.net>
Subject: Re: Wheel Nuts


Do yourself a favor, and don't buy them, unless some stouter configuration is offered by someone else - I've had two sets, and they're shit. The first ones had a small pin, say about 3/16" diameter. After several years, the pins seemed to pull out of the tool. The second set had this 1/8" recessed cloverleaf sort of pattern. A better design than the pins, but still complete shit. I wound up having to drill two of them out over time, and the third was so difficult, I had to take it to the dealer for removal (and in case you're wondering I always use a torque wrench on my wheels, tightening them to no more than 85lbs.) On Tue, 24 Aug 2004 19:50:50 +0100, "Dave" <Davenospam.con> wrote: >Thanks guys. >I'll have a word with my dealer. > >Dave >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2019 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]