Date: Wed, 22 Sep 2004 19:04:54 +0300 From: "A Peltola" <akzu900nospamail.com> Subject: Re: 99/c900 Clutch Spacer Tool?
In my case, there were two bolts under the flywheel connecting the block and transmission. So I had to remove the clutch and the flywheel to get to these bolts.. -Aki & c900t16 > You do not have to remove the clutch if you are going to seperate the engine > from the transmission, Just undo the bolts that hold the slave in place and > it will come forward enough to allow the engine to be lifted from the box > after bolts securing the engine and box are undone. The point to remember is > to make sure that as you lift off the engine is to make sure that it is kept > horizontal. Not wishing to piss on anybodys parade, It can be done this way > and saves a lot of time and hassle. HTH, Tom. > >