Date: Mon, 20 Sep 2004 23:05:10 +0100
From: Grunff <grunffnospam.com>
Subject: Re: 99/c900 Clutch Spacer Tool?


Dave Hinz wrote: > That whole assembly is out already. I'm fully anticipating pulling > at least the engine, and depending on where that rod bolt came through, > maybe the tranny too. If I'm going that far, I might as well take > all the easy stuff out, do a good cleaning, touch up the rust spots, > and do this thing like I mean it. Not doing a full restoration, > but if it's out, why not... Having the engine out makes life so much easier. You can do the seals at the same time, check the engine mounts etc. Wish I had my old 99... -- Grunff

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2021 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]