Date: Sun, 03 Apr 2005 17:41:30 GMT
From: Pat Noonan <>
Subject: 91 900 Heater Hose replacement questions

I am looking to replace my lower(?) heater hose, it is a Y'ed hose that runs from the firewall( heater matrix) to the water pump and branches off to under the carb area. My problem is that the end at the water pump is impossible to get at, I can sort of see the hose clamp, but no way off accessing it. My question(s) What do I have to remove to replace this hose, can I remove the air condition compressor, and get at it that way, and if so, How do I remove the compressor, I can see two bolts, but do I also have to remove the alternator, or anything else, god forbid Do I have to remove the intake manifold, How much of a hassle is this, it looks like I would have to disconnect quite a bit to get at all the bolts there as well. Any advice would be greatly appreciated, I dont want to start causing other problems tearing off things if I dont need to. It is a little too rainy and windy here today to work on anyway! It is a 91 Saab 900, 2.1 litre, Air conditioning, automatic trans, Cant think of anything else that might be relevant Thanks, Pat

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2021 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]