Date: Fri, 15 Apr 2005 21:22:33 -0500 From: "Jerry Frye" <jfrye098nospamnet> Subject: alternator terminals
This is for a 1986 9000 Turbo with a Bosch alternator. My battery wasn't charging so I pulled my alternator. After checking the brushes it was obvious they needed to be replaced. I did that and was in the process of putting it back in when I noticed one of the wires that was attached to it had broken and was laying on the ground. It was the wire with a push on terminal that went to the terminal marked "+" on the alternator. The wires that go to the B+ and D+ terminals are still intact. The wiring diagram I have doesn't show that terminal. It only shows ground B+ and D+. Does anyone know what the wire coming from the + terminal should be connected to? Thanks. Jerry