Click Banner for Details on this Saabnet.com Classified

Date: Mon, 18 Jul 2005 02:36:41 +0200
From: MH <nonospamks.no>
Subject: Re: 89 Saab 900 Error code readout


> My 89 Saab 900 is acting up and I need to do a read-out of the fault codes. > I need someone to describe the proper hookup for wiring of the readout > switch to the four wire connector under the rear seat. I've got four wires, > red, black, blue/white, and gray/white. According to the Haynes 1979-1988 900 manual (fig 13.45), in the 1988 and later US 900S, that is pin #3 in a 3 pin connector on the right side of the front fender, near the power steering oil reservoir and the vacuum tank. See http://members.home.nl/saab96/engcodes.jpg -- MH '72 97 '77 96 '78 95 '79 96 '91 900i

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network - saabnet.com.
For usage guidelines, see the Saabnet.com Mission and Purpose Page.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]