Date: Tue, 26 Jul 2005 16:34:29 +0200
From: "Planet" <>
Subject: Re: Ignition problems/ 1994 conv 900s

Look at the Security system. If the motor turn but does not start they ignition breaker is still operating. I dont have the english word for it so I can only hope you understand what I mean. Pieter "TonyF" <> schreef in bericht > > Grunff wrote: >> TonyF wrote: >> > After replacing my crank pulley my car will not start. I then put in >> > new ignition cables, coil, rotor and distributor cap. >> > Still will not start. I don't seem to be getting any spark. Any >> > suggestions >> >> Need more info. Are you saying you changed the crank pulley, did nothing >> else, and it wouldn't start? Turns over, but no start? >> >> >> -- >> Grunff > > Exactly. turns over but will not start. Yesterday i removed the crank > pulley again to inspect the plate that mounts on the back of the > pulley, it's damaged. I have a new one on order and think this might be > the problem. From what i understand it tells the ignition system when > the #1 cylinder is in the correct position. >

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]