Click Banner for Details on this Classified

Date: Thu, 25 Aug 2005 06:37:07 +0100
From: Pooh Bear <>
Subject: Re: Help me out: only high beam on 1 headlight?

Colin Stamp wrote: > On Wed, 24 Aug 2005 02:41:17 +0100, Pooh Bear > <> wrote: > > >When the 'headlamp control unit' plays up it can also decide to pay silly buggers > >with the filament failed warning too. > > I'd assumed that would be unlikely, since it would two faults to be > there both at the same time. Funnily enough, one faulty connection in that unit gives both those faults. > Having said that, I suppose a fault with the failure warning system > could go un-noticed for ages, giving time for the fault that puts out > the light to happen as well. > > > >Been there. It's very annoying. When you get the unit apart it's obvious why ( if > >you know your electronics ). > > Yep. I've been there too, but the crack on mine was only just visible > if you wiggled it whilst staring at the joint through a jewelers's > eye-glass. It can be totally invisible to the eye actually. Graham

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]