Date: Tue, 23 Aug 2005 23:08:57 +0100
From: Pooh Bear <>
Subject: Re: Help me out: only high beam on 1 headlight?

BasMan wrote: > Strange.... Someone flashed me that only one headlight was working. So the > next morning I changed the bulb for a new one, but still no headlight. > Strangely, when I turned on the high beam it was working! But on normal > (dimmed) beam, there's no light. I checked the 3 pin connector with a volt > meter and I had a readout of 11,4 volts (or something). > So.... Does anyone have an idea what I can do next? I would be very grateful > for any suggestions. Model, year etc ? I'm already thinking about the red 'lamp control unit' though. Certainly 9000s have this. It sufferes from fatigue to the internal solder joints. Easily fixed if you have a soldering iron. If relevant to your problem I can give you instructions to fix it. Graham

Return to Main Index

The content on this site may not be republished without permission. Copyright © 1988-2020 - The Saab Network -
For usage guidelines, see the Mission and Purpose Page.
[Contact | Site Map | on Facebook | on Twitter | Shop Amazon via TSN | Site Donations]