The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 3/26 M Car Covers (by State of Nine) | 12/12 Make Amazon Pay Saabnet!
Date: Sun, 28 Aug 2005 21:29:04 GMT
From: John B <rotten_NOSPAM_nospam.org>
Subject: Re: [Saab_c900] saab ball joint tool - alternatives?


On Sun, 28 Aug 2005 16:59:55 +1000 (EST), Craig's Saab C900 Site <c900nospam.apana.org.au> wrote: > > Hi everyone, > > The upper balljoints for both front wheels on my 1985 900i are shot > (broken boots, etc.) and the only part where I'm getting stuck is getting > the ball joint shaft out of the swivel member. The Bentley manual says not > to use a generic ball joint separator fork. > Hi, I did balljoints recently on a 1992 900 (all 4), and used a regular fork with a hammer. I read the warning in Bentley, but ignored it. It worked perfectly fine. I used whatever balljoint fork they sell at Advance Auto Parts. Good luck, John

Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]