The banner above is an advertisment - if it asks you to download software, please ignore.
Site News - 4/9 Saab Owners' Convention Day Pass Raffle | 3/26 M Car Covers (by State of Nine) 
Date: Mon, 03 Oct 2005 04:25:48 GMT
From: "LC" <goalie22nospamail.com>
Subject: Clutch Slave or piping?



I recently replaced my clutch master cylinder.  I'm getting conditions where 
my  clutch sticks, can't pull the car out of gear, etc.  There's always a 
nice little puddle of hydraulic fluid.  The saab faq's state that's usually 
the slave cylinder, but I'm not too certain that it might not be the piping 
between the master/slave.

Any ideas?  Also.. any ideas what I might look at to have someone do it for 
me?  I could pull, and reseat the slave and clutch.  Problem is, I can't 
pressure bleed the thing.. I don't have the equipment.

Thanks all!
-LC
Return to Main Index
StateOfNine.com
SaabClub.com
Jak Stoll Performance
M Car Covers
Ad Available

The content on this site may not be republished without permission. Copyright © 1988-2024 - The Saab Network - saabnet.com.
For usage guidelines, see the Mission & Privacy Notice.
[Contact | Site Map | Saabnet.com on Facebook | Saabnet.com on Twitter | Shop Amazon via TSN | Site Donations]