Date: Sun, 14 May 2006 23:16:49 GMT From: Bill Jackson <wjacksonnospamester.rr.com> Subject: Re: Door Skin Removal - 1996 9000 CS
Actually, it's not that hard replacing the outside of a door. The outside is bent over the structural part and then crimped and spot welded. The easiest way to get the door "skin" off is to grind away the edge of the door all the way around, it'll fall off. You need to break the spot welds on the inside and then fit, crimp and spotweld the new one in place. On 5/14/06 5:12 PM, in article 1147641153.674669.293510nospam2000cwc.googlegroups.com, "R. Frist" <rhfristnospamzon.net> wrote: > I think door card is more of a British expression. I had never heard > of a door skin and just assumed it was the interior panel. As you > imply, it is hard to imagine replacing just the outside of the door. >